How to Turn on a Priority Current

We are going to demonstrate to you how to power on and operate the Priority Current ebike.

On the left side of the handlebar, you will find the control panel of the bike. It has the power button, information toggle, light switch, and the plus and minus buttons to cycle through the levels of bike assist. At the center of the handlebar, you will find the LCD, which will display all the pertinent information you need when you are on a ride. To power this ebike on is very simple and straightforward. You just need to press the power button and the LCD screen will activate.

On the display interface, you will find information such as your speed and battery life. It also displays the current bike assist you are in, which you can adjust using the plus and minus buttons to cycle from 0 to 5 (with 0 having no assist like in riding a regular bike and 5 having the motor do almost all the work for you). It also displays the odometer and the distance covered by your current trip. If you press the information button, the LCD will show other information such as your average speed, max distance to be driven, how long you’ve been riding, and other relevant details.

Lastly, there is the light button, which is identifiable by a high beam light icon. It toggles on and off the LED lights on the front and rear of the bike.

To shut this bike off, all you have to do is go right back to the power button and press and hold it for a few seconds until the display shuts off.

As a last note, you should always do regular inspections and tune-ups for your eBikes. It is advised to take it to reputable bike mechanics after the initial break-in period of 100 to 200 miles to ensure everything is running smoothly.

If you’re local to San Diego, California and you need an ebike unboxed, assembled, repair, or just want to come by and have a look at our eBike showroom stop by our electric bike repair shop located at 3330 Kurtz Street, San Diego, CA. 92110.